| adm | Find | login register |
alan joined: 2007-09-25 posted: 134 promoted: 7 bookmarked: 1 |
debian sid 裝 winlin 的 gcin_2.6.8-0_i386.deb 執行 im-config 出現以下訊息 Current configuration for the input method: | |||||||
winlin joined: 2007-09-25 posted: 1859 promoted: 111 bookmarked: 33 |
freelan: 這樣的訊息下,gcin還能否正常使用? 沒在用Sid,所以不太清楚目前Sid和Wheezy有哪些差異。小弟剛裝了im-config試了一下debian testing下的結果,好像還OK: 不知道其他比較懂im-config或Sid的前輩能否幫忙看一下? 另外,freelan有試過用Sid編看看嗎?不知是否也有同樣的問題? ------------------------------------------------------------------- | |||||||
alan joined: 2007-09-25 posted: 134 promoted: 7 bookmarked: 1 |
目前是用XIM .xsession-errors /etc/X11/Xsession: 28: /home/alan/.xinputrc: eval_gettext: not found gcin 可以正常使用,只是出現跟之前不太一樣的訊息,呵 不知道是不是這檔案裡的路徑有問題? $ vi /usr/share/im-config/data/50_gcin.rc # start gcin # start gcin daemon # set variables for the plain XIM GTK_IM_MODULE=xim # There is no gtk3 module for SCIM for wheezy at this moment. QT_IM_MODULE=xim # This is placeholder for now. # scim has no clutter support edited: 2
| |||||||
alan joined: 2007-09-25 posted: 134 promoted: 7 bookmarked: 1 |
換成 im-switch 一切正常。是im-config的問題。 | |||||||
eliu joined: 2007-08-09 posted: 11482 promoted: 617 bookmarked: 187 新竹, 台灣 |
在 ubuntu 也是用 im-switch,不支援 im-config。 這兩個寫入的 file 不一樣。 | |||||||
alan joined: 2007-09-25 posted: 134 promoted: 7 bookmarked: 1 |
了解!我也不知在哪裡看到要改用im-config,或許在gcin 放段說明會好點。 | |||||||
eliu joined: 2007-08-09 posted: 11482 promoted: 617 bookmarked: 187 新竹, 台灣 |
我不清楚 debian 要用那一個,只看到 Ubuntu 設定介面需要用 im-switch 才會顯示正確。 |
| adm | Find | login register |